杰理芯片老是自动复位

THE_GREAT_WALL

正常使用过程中，AC7003F芯片突然复位，概率比较高。下面是LOG，请大家帮忙看下，到底是什么情况导致的？
[00:01:40.670] get_vbat_level = 410
[00:01:41.671]get_bt_connect_status() = 45
[00:01:41.671]get_cur_battery_level = 9
[00:01:41.672] get_vbat_level = 410
[00:01:42.673]get_bt_connect_status() = 45
[00:01:42.673]get_cur_battery_level = 9
[00:01:42.674] get_vbat_level = 410
[00:01:43.675]get_bt_connect_status() = 45
[00:01:43.676]get_cur_battery_level = 9
[00:01:43.676] get_vbat_level = 410
[00:01:43.876][Info]: [LMP]LMP_EVENT_TX_POWER
[00:01:43.901][Info]: [LMP]LMP_MAX_POWER

[00:00:00.100]get_chip_id:   ffff
[00:00:00.101]get_vbat_trim: 9
[00:00:00.102]get_vbg_trim:  2
[00:00:00.103][0-MSYS]--Reset Source : 0x1
[00:00:00.103]P11 SYS RESET
[00:00:00.104][1-P11]--Reset Source : 0x4
[00:00:00.105]P33 SYS RESET
[00:00:00.106][2-P33]--Reset Source : 0x1
[00:00:00.106]VDDIO POR
[00:00:00.108]=================Version===============
[00:00:00.109]????-@20230626-$85ec153
[00:00:00.110]BTSTACK-@20230626-$0fc65b2
[00:00:00.111]BTCTRLER-@20230626-$558c57b
[00:00:00.111]MEDIA-@20230626-$3c8aec7
[00:00:00.112]UPDATE-@20230626-$beae1c0
[00:00:00.113]=======================================
[00:00:00.115][Info]: [SDFILE]VM size: 0x18700 @ 0x66800
[00:00:00.116][Info]: [VM]norflash_open() (null) 0 0

[00:00:00.117][Info]: [VM]ae24 <------> ae24

[00:00:00.118][Info]: [SDFILE]disk capacity 512 KB
[00:00:00.120]last file_addr:6648f 25a
[00:00:00.120]end_addr:66800

49 53 44 55 04 02 52 FF AD 0E 56 18 2D 43 FF FF
[00:00:00.122][Debug]: [SDFILE]sdfile mount succ
[00:00:00.124][Info]: [BTIF]syscfg_btif_init, spi_mode: 0, logic_addr: 0x1e7df00, phy_addr: 0x7ef00
[00:00:00.126][Info]: [VM]vm_info:addr:0x66800, len:0x4000, mode:0x1
[00:00:00.133][Info]: [BOARD]Power init : C:\Users\Administrator\Desktop\SDK\JL\AC7003F\TAE1209_SDK\sdk\apps\earphone\board\br36\board_ac7003f_demo.c
[00:00:00.150]P3_WKUP_EN0        is 0x6
[00:00:00.151]P3_WKUP_EN1        is 0x0
[00:00:00.152]P3_WKUP_EDGE0      is 0x7f
[00:00:00.153]P3_WKUP_EDGE1      is 0x0
[00:00:00.154]P3_WKUP_LEVEL0     is 0xfd
[00:00:00.154]P3_WKUP_LEVEL1     is 0xf
[00:00:00.155]P3_WKUP_PND0       is 0x0
[00:00:00.156]P3_WKUP_PND1       is 0x0
[00:00:00.157]P3_AWKUP_EN        is 0x7
[00:00:00.157]P3_AWKUP_P_IE      is 0x7
[00:00:00.158]P3_AWKUP_N_IE      is 0x3
[00:00:00.159]P3_AWKUP_LEVEL     is 0x0
[00:00:00.160]P3_AWKUP_P_PND     is 0x0
[00:00:00.161]P3_AWKUP_N_PND     is 0x0
[00:00:00.162]P3_AWKUP_FLT0      is 0x7
[00:00:00.162]P3_AWKUP_FLT1      is 0x7
[00:00:00.163]P3_AWKUP_FLT2      is 0x7
[00:00:00.164]P3_AWKUP_INSEL     is 0x0
[00:00:00.165]P3_PORT_SEL0     is 0xb
[00:00:00.166]P3_PORT_SEL1     is 0x19
[00:00:00.166]P3_PORT_SEL2     is 0x1d
[00:00:00.167]P3_PORT_SEL3     is 0xa
[00:00:00.168]P3_PORT_SEL4     is 0xd
[00:00:00.169]P3_PORT_SEL5     is 0x8
[00:00:00.169]P3_PORT_SEL6     is 0x4
[00:00:00.170]P3_PORT_SEL7     is 0x1d
[00:00:00.171]P3_PORT_SEL8     is 0x10
[00:00:00.172]P3_PORT_SEL9     is 0x18
[00:00:00.173]P3_PORT_SEL10    is 0xc
[00:00:00.173]P3_PORT_SEL11    is 0x1b
[00:00:00.174]P3_APORT_SEL0   is 0x12
[00:00:00.175]P3_APORT_SEL1   is 0x2
[00:00:00.176]P3_APORT_SEL2   is 0xd
[00:00:00.177]trim: 0, wvdd_lev: 7
[00:00:00.178]add sample ch e
[00:00:00.178]add sample ch 6000e
[00:00:00.179]add sample ch 4000e
[00:00:00.189]vbg_adc_value = 293
[00:00:00.199]vbat_adc_value = 373
[00:00:00.199]vbat = 4108 mv
[00:00:00.209]dtemp_adc_value = 338
[00:00:00.210]dtemp = 930 mv
[00:00:00.212][Info]: [USER_CFG]bt name configHILIPS TAE1209
[00:00:00.213][Info]: [USER_CFG]tws pair code config:

FF FF
[00:00:00.214][Info]: [USER_CFG]rf config:10

[00:00:00.215][Info]: [USER_CFG]aec config:
[00:00:00.216][Info]: [USER_CFG]sms_ans config:
[00:00:00.217][Info]: [USER_CFG]aec cfg read succ


08 08 16 01 66 66 A6 3F 66 66 A6 3F 66 66 A6 3F
66 66 A6 3F 00 00 00 41 00 00 80 40 00 00 48 C2
00 00 40 41 00 00 00 00 00 00 20 C2 00 00 8C C2
00 00 80 3F 00 00 8C C2 00 00 40 C0 00 00 80 40
00 00 A0 3F EC 51 B8 3D
[00:00:00.221][Info]: [USER_CFG]aec_cfg mic_gain:8 mic1_gain:8 dac_gain:8
[00:00:00.223][Info]: [USER_CFG]mic_bias_res:17
[00:00:00.224][Info]: [USER_CFG]mic_bias_adjust NULL
[00:00:00.225][Info]: [USER_CFG]mic_ldo_vsel_adjust NULL

[00:00:00.226][Info]: [USER_CFG]max vol:16 default vol:16 tone vol:10
[00:00:00.227][Info]: [USER_CFG]warning_tone_v:3400mv poweroff_tone_v:3300mV
[00:00:00.229][Info]: [USER_CFG]auto_off_time:300 minutes
[00:00:00.230][Info]: [USER_CFG]mac:

55 29 CE E4 8D 83
[00:00:00.232][Info]: [USER_CFG]lrc parameter config:

90 01 90 01 90 01 90 01 01
[00:00:00.254]add sample ch 5
[00:00:00.258][Info]: [UPDATE]update module init ok

[00:00:00.259][Info]: [TEST-UPDATE]testbox msg handle reg:1e00eac

[00:00:00.260][Info]: [APP_CHARGESTORE]channel = U

[00:00:00.270][Info]: [VM]flash_data_width = 2, flash_read_mode = 0

[00:00:00.272][Info]: [APP]app_main

[00:00:00.273]audio_enc_init
[00:00:00.274]audio_dec_init
[00:00:00.275][Info]: [AUDIO-DAC]audio_dac_init

[00:00:00.277]DAC VOL MODE SET: NORMAL_MODE
[00:00:00.278][Info]: [APP_AUDIO]DAC_DTB NULL,use fast feedback
[00:00:00.279]audio dac no analog gain !!!
[00:00:00.280]audio_dac_trim_value_check -43 42
[00:00:00.281][Info]: [APP-UPDATE]<--------update_result_deal=0x5a00 5faf--------->

[00:00:00.283]=================update_param_len:1004
[00:00:00.284]vbat: 410
[00:00:00.284]vbat: 410
[00:00:00.285]vbat: 410
[00:00:00.285]vbat: 410