AC791开发板tf卡挂载后报错，不停重启

lzsoft

请问一下，这个TF卡挂载后，电脑没有显示盘符，进入低电后就关闭了，然后不停报错重启，是什么原因？谢谢

[00:00:19.906] BenchMarkTest RUN END
[00:00:19.910]-------sd_fs_test--------
[00:00:19.913][Info]: [SD]sd0 open !
[00:00:19.917][Info]: [SD]sd0_port_init: A
[00:00:19.922][Info]: [SD]sd0 online
[00:00:19.926]sd0: in
[00:00:19.940][Info]: [SD]sd is 2.0 SDHC !
[00:00:19.946][Info]: [SD]sd init step 1 is success !
[00:00:19.961][Info]: [SD]sd support high speed !
[00:00:19.966][Info]: [SD]sd support 4 bit mode !
[00:00:19.984][Info]: [SD]sd set high speed mode success !
[00:00:19.989][Info]: [SD]sd init step 2 is success !
[00:00:19.994][Info]: [SD]sd capacity  =  60973056 sector  -->  29772M
[00:00:20.012]mount sd0 suss
[00:00:20.015][Info]: [SD]sd0 open !
[00:00:20.018]-------sd_fs_test456--------
[00:00:24.799][Info]: [SD]sd0 dev entry lowpower !
[00:00:24.804][Info]: [SD]sd0 close
[00:01:00.010]event: app_core, 200b23a
[00:01:00.013]file:/jks/workspace/wifi_sdk_all_export_gitlab/wifi_sdk/lib/utils/event/event.c, line:268, task:sys_event
[00:01:00.024]ASSERT-FAILD: err != OS_TIMEOUT task app_core no response

[00:00:00.100]========= system reset reason: SOFT =========

[00:00:00.100]~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[00:00:00.100]   WL82(AC791N) CHIP_ID: 0x6f01  setup_arch Sep 29 2024 13:19:05
[00:00:00.100]sys_clk = 320000000,sdram_clk = 0,hsb_clk = 160000000,lsb_clk = 53333333, sfc_clk = 80000000
[00:00:00.100]CODE+CONST SIZE = 181440
[00:00:00.100]SDRAM_SIZE = 2097152, DATA_SIZE = 0,BSS_SIZE = 0,REMAIN_SIZE = 2097152
[00:00:00.100]RAM_SIZE = 523596,DATA_SIZE = 11916,BSS_SIZE = 20456,REMAIN_SIZE = 491224
[00:00:00.100]CACHE_RAM_SIZE = 28672,DATA_SIZE = 40, BSS_SIZE = 0,REMAIN_SIZE = 28632
[00:00:00.100]HEAP_SIZE = 491180
[00:00:00.100]~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[00:00:00.100]cpu 0 usp limit 0  ffffffff
[00:00:00.100]cpu 0 ssp limit 1c05a5c  1c06a5c
[00:00:00.100][Info]: [OS]task_create: app_core, 0x2004e18

小牛

先排除下硬件还是软件问题。
杰理WIFI是开源的，在git上面找原厂技术支持群。